Coloured Window Film in BC: Types, Costs, and What Offices Need

This guide covers window tinting for homes and buildings. Ecovision does not tint vehicles, for architectural glass only.

Quick Answer

Direct Answer: Coloured window film in BC is decorative architectural film printed or dyed in a solid, frost, or gradient colour. Installed cost is typically $9 – $16 per square foot on interior office glass. Certified LLumar and Vista grades still block more than 99% of UV on the treated lite. Ecovision Window Films specifies colour film across Vancouver and the Lower Mainland.

What Is Coloured Window Film on Office Glass?

Ecovision installer in a brick-red shirt applying coloured decorative film to Vancouver office glass
Ecovision installers apply decorative colour film on interior partitions in occupied towers.

Coloured window film is a polyester overlay with a printed, dyed, or frosted colour layer. It is not stained glass and it is not automotive tint. On office partitions it screens sightlines at seated height, carries a brand colour, and still admits daylight through the clear or light-frost zone.

Ecovision Window Films installs this as an interior wet application. Typical boardroom lites at Bentall 4-class towers are 4 to 8 feet wide. A single colour band on that glass is a one-day interior job, not a glazing replacement.

How Much Does Coloured Window Film Cost in BC?

Professionally installed decorative colour film in BC runs $9 – $16 per square foot. Custom printed logos or multi-colour bands sit toward the top of that band. Security overlays, if specified on the same lite, sit at $16 – $22. See the full how much does window film cost in BC guide for solar and safety ranges.

ProductTypical useInstalled (CAD / sq ft)
Solid colour frostBoardrooms, washrooms$9 – $16
Gradient colour fadeSeated privacy, open plan$9 – $16
Clear solar (VS60 / VS70)Heat and UV, not colour$10 – $18
Safety overlay (PS4 to PS8)Doors and storefronts$16 – $22

A 40-square-foot conference partition at $9 – $16 is $360 – $640 before tax. Cure time is 30 to 60 days. Fine moisture haze in the coloured zone during that window is normal.

Does Coloured Window Film Provide Privacy?

Close-up of coloured gradient architectural film being squeegeed onto interior glass
Colour density is manufactured into the film. Alignment to the mullion is set before the wet lay.

Yes, where the colour is dense enough to scatter or block image-forming light. A light teal frost hides facial detail at 1 to 2 metres. A pale wash still shows silhouettes. Unlike one-way film, colour frost does not reverse at night. For 24-hour privacy, specify frost or dual-reflective DR grades, not a transparent dye.

That is the same split used on frosted window film in Vancouver and on healthcare glass at Rosemary Heights Seniors Village, where corridor lites need dignity after dusk.

Does Coloured Film Block UV and Heat?

Certified architectural colour and frost grades block more than 99% of UV on the treated area. Heat rejection is a separate spec. Decorative colour on an interior partition is not a substitute for LLumar VS60 (59% VLT, 50% TSER on 6 mm dual clear) on sun-facing curtain wall. Pair products: solar on the envelope, colour on the interior glass.

Rocky Mountaineer facility surveys follow that split: solar on west glass, decorative or frost on interior partitions. For UV detail, see does window film block UV rays.

How Is Coloured Window Film Installed in Vancouver?

Vancouver office interior with coloured frosted film on glass partitions
Interior colour film keeps daylight in open-plan floors while screening seated sightlines.

Measure, confirm colour sample on the actual lite, cut, wet apply, squeegee, edge trim. Occupied offices usually finish after hours or in a 2 to 4 hour window per room. WorkSafeBC ladder rules apply. Film is reversible. It is not sandblasting.

Strata and landlord notes: interior partition film typically does not change the building envelope. Exterior-facing suite glass may need written approval. Ecovision provides a product letter for that file. Call (236) 862-0052 or use the contact page.

Related Articles

Frequently Asked Questions

About the Author: This article was written by the Ecovision Window Films team. Edward, Director at Ecovision, brings a distinctive perspective to the window film industry, with over a decade in real estate development, including roles as Executive Director at a real estate development firm and Director of Strategic Partnerships, before joining Ecovision. That background gives the company a sharp edge in serving BC property managers and building owners. Ecovision is a certified installer for leading film brands with completed projects for healthcare facilities, government buildings, and commercial properties throughout the Lower Mainland. For a free site assessment, call (236) 862-0052 or visit ecovisioncanada.com/contact/.

Request your free estimate!

You're In! Check Your Email

Thanks for requesting the white paper. Look for an email from Ecovision with your PDF attached.

Please check your inbox and spam folder. The email also includes a link if you prefer to read the PDF online.

Need a hand? Contact us below and we’ll help.

Get Instant Access to Our White Paper!

Unlock expert insights with just one step. Enter your email below to receive the full white paper instantly.