This guide covers window tinting for homes and buildings. Ecovision does not tint vehicles, for architectural glass only.
Quick Answer
Direct Answer: Coloured window film in BC is decorative architectural film printed or dyed in a solid, frost, or gradient colour. Installed cost is typically $9 – $16 per square foot on interior office glass. Certified LLumar and Vista grades still block more than 99% of UV on the treated lite. Ecovision Window Films specifies colour film across Vancouver and the Lower Mainland.
What Is Coloured Window Film on Office Glass?

Coloured window film is a polyester overlay with a printed, dyed, or frosted colour layer. It is not stained glass and it is not automotive tint. On office partitions it screens sightlines at seated height, carries a brand colour, and still admits daylight through the clear or light-frost zone.
Ecovision Window Films installs this as an interior wet application. Typical boardroom lites at Bentall 4-class towers are 4 to 8 feet wide. A single colour band on that glass is a one-day interior job, not a glazing replacement.
How Much Does Coloured Window Film Cost in BC?
Professionally installed decorative colour film in BC runs $9 – $16 per square foot. Custom printed logos or multi-colour bands sit toward the top of that band. Security overlays, if specified on the same lite, sit at $16 – $22. See the full how much does window film cost in BC guide for solar and safety ranges.
| Product | Typical use | Installed (CAD / sq ft) |
|---|---|---|
| Solid colour frost | Boardrooms, washrooms | $9 – $16 |
| Gradient colour fade | Seated privacy, open plan | $9 – $16 |
| Clear solar (VS60 / VS70) | Heat and UV, not colour | $10 – $18 |
| Safety overlay (PS4 to PS8) | Doors and storefronts | $16 – $22 |
A 40-square-foot conference partition at $9 – $16 is $360 – $640 before tax. Cure time is 30 to 60 days. Fine moisture haze in the coloured zone during that window is normal.
Does Coloured Window Film Provide Privacy?

Yes, where the colour is dense enough to scatter or block image-forming light. A light teal frost hides facial detail at 1 to 2 metres. A pale wash still shows silhouettes. Unlike one-way film, colour frost does not reverse at night. For 24-hour privacy, specify frost or dual-reflective DR grades, not a transparent dye.
That is the same split used on frosted window film in Vancouver and on healthcare glass at Rosemary Heights Seniors Village, where corridor lites need dignity after dusk.
Does Coloured Film Block UV and Heat?
Certified architectural colour and frost grades block more than 99% of UV on the treated area. Heat rejection is a separate spec. Decorative colour on an interior partition is not a substitute for LLumar VS60 (59% VLT, 50% TSER on 6 mm dual clear) on sun-facing curtain wall. Pair products: solar on the envelope, colour on the interior glass.
Rocky Mountaineer facility surveys follow that split: solar on west glass, decorative or frost on interior partitions. For UV detail, see does window film block UV rays.
How Is Coloured Window Film Installed in Vancouver?

Measure, confirm colour sample on the actual lite, cut, wet apply, squeegee, edge trim. Occupied offices usually finish after hours or in a 2 to 4 hour window per room. WorkSafeBC ladder rules apply. Film is reversible. It is not sandblasting.
Strata and landlord notes: interior partition film typically does not change the building envelope. Exterior-facing suite glass may need written approval. Ecovision provides a product letter for that file. Call (236) 862-0052 or use the contact page.
Related Articles
- Gradient Window Film in BC: What It Is, How It Works, and What It Costs
- Frosted Window Film in Vancouver: Types, Costs, and What to Know Before You Buy
- Privacy Film for Bathroom Windows
- How Much Does Window Film Cost in BC? (2026 Pricing Guide)
- Does Frosted Window Film Work at Night?
Frequently Asked Questions
About the Author: This article was written by the Ecovision Window Films team. Edward, Director at Ecovision, brings a distinctive perspective to the window film industry, with over a decade in real estate development, including roles as Executive Director at a real estate development firm and Director of Strategic Partnerships, before joining Ecovision. That background gives the company a sharp edge in serving BC property managers and building owners. Ecovision is a certified installer for leading film brands with completed projects for healthcare facilities, government buildings, and commercial properties throughout the Lower Mainland. For a free site assessment, call (236) 862-0052 or visit ecovisioncanada.com/contact/.




